Geek Answers Handbook

OpenSSL build script fails to run as the "run script" phase in Xcode (runs outside of Xcode)

I am trying to run a script to build OpenSSL for iOS (armv6, armv7 and i386) as the "run script" phase in Xcode.

The script succeeds when run from the command line as a stand-alone script. The result is a compiled directory libcrypto.a, libssl.aand includewith headers.

However, when I run the script as a stage in running the script in Xcode, it approaches the end of make and errors, stating that it cannot find any characters referenced by libcrypto.

shlib_target=; if [ -n "" ]; then \
        shlib_target="bsd-gcc-shared"; \
    fi; \
    LIBRARIES="-L.. -lssl  -L.. -lcrypto" ; \
    make -f ../Makefile.shared -e \
        APPNAME=openssl OBJECTS="openssl.o verify.o asn1pars.o req.o dgst.o dh.o dhparam.o enc.o passwd.o gendh.o errstr.o ca.o pkcs7.o crl2p7.o crl.o rsa.o rsautl.o dsa.o dsaparam.o ec.o ecparam.o x509.o genrsa.o gendsa.o genpkey.o s_server.o s_client.o speed.o s_time.o apps.o s_cb.o s_socket.o app_rand.o version.o sess_id.o ciphers.o nseq.o pkcs12.o pkcs8.o pkey.o pkeyparam.o pkeyutl.o spkac.o smime.o cms.o rand.o engine.o ocsp.o prime.o ts.o" \
        LIBDEPS=" $LIBRARIES " \
        link_app.${shlib_target}
( :; LIBDEPS="${LIBDEPS:--L.. -lssl  -L.. -lcrypto }"; LDCMD="${LDCMD:-/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc -arch i386}"; LDFLAGS="${LDFLAGS:--isysroot /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator5.0.sdk  -DOPENSSL_THREADS -pthread -D_THREAD_SAFE -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DTERMIOS -O3 -fomit-frame-pointer -Wall}"; LIBPATH=`for x in $LIBDEPS; do echo $x; done | sed -e 's/^ *-L//;t' -e d | uniq`; LIBPATH=`echo $LIBPATH | sed -e 's/ /:/g'`; LD_LIBRARY_PATH=$LIBPATH:$LD_LIBRARY_PATH ${LDCMD} ${LDFLAGS} -o ${APPNAME:=openssl} openssl.o verify.o asn1pars.o req.o dgst.o dh.o dhparam.o enc.o passwd.o gendh.o errstr.o ca.o pkcs7.o crl2p7.o crl.o rsa.o rsautl.o dsa.o dsaparam.o ec.o ecparam.o x509.o genrsa.o gendsa.o genpkey.o s_server.o s_client.o speed.o s_time.o apps.o s_cb.o s_socket.o app_rand.o version.o sess_id.o ciphers.o nseq.o pkcs12.o pkcs8.o pkey.o pkeyparam.o pkeyutl.o spkac.o smime.o cms.o rand.o engine.o ocsp.o prime.o ts.o ${LIBDEPS} )

Undefined symbols for architecture i386:
  "_ENGINE_load_gost", referenced from:
      _ENGINE_load_builtin_engines in libcrypto.a(eng_all.o)
ld: symbol(s) not found for architecture i386
collect2: ld returned 1 exit status
make[2]: *** [link_app.] Error 1
make[1]: *** [openssl] Error 2
make: *** [build_apps] Error 1

I am pretty sure this is a problem with paths, but I can't figure out how to tell Xcode (or script) which paths to use.

script, , Xcode 4.3 ( , , / , Xcode.app).

script :

#!/bin/sh

#  Automatic build script for libssl and libcrypto 
#  for iPhoneOS and iPhoneSimulator
#
#  Created by Felix Schulze on 16.12.10.
#  Copyright 2010 Felix Schulze. All rights reserved.
#
#  Licensed under the Apache License, Version 2.0 (the "License");
#  you may not use this file except in compliance with the License.
#  You may obtain a copy of the License at
#
#  http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.
#
###########################################################################
#  Change values here                                                     #
#                                                                         #
VERSION="1.0.0c"                                                          #
SDKVERSION="5.0"                                                          #
#                                                                         #
###########################################################################
#                                                                         #
# Don't change anything under this line!                                  #
#                                                                         #
###########################################################################



CURRENTPATH=`pwd`
CURRENTPATH="${CURRENTPATH}/openssl"

set -e
if [ ! -e openssl-${VERSION}.tar.gz ]; then
echo "Downloading openssl-${VERSION}.tar.gz"
curl -O http://www.openssl.org/source/openssl-${VERSION}.tar.gz
else
echo "Using openssl-${VERSION}.tar.gz"
fi

mkdir -p "${CURRENTPATH}/src"
tar zxf openssl-${VERSION}.tar.gz -C "${CURRENTPATH}/src"
rm openssl-${VERSION}.tar.gz
cd "${CURRENTPATH}/src/openssl-${VERSION}"


############
# iPhone Simulator
echo "Building openssl for iPhoneSimulator ${SDKVERSION} i386"
echo "Please stand by..."

export CC="/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc -arch i386"
mkdir -p "${CURRENTPATH}/bin/iPhoneSimulator${SDKVERSION}.sdk"

LOG="${CURRENTPATH}/bin/iPhoneSimulator${SDKVERSION}.sdk/build-openssl-${VERSION}.log"

./configure BSD-generic32 --openssldir="${CURRENTPATH}/bin/iPhoneSimulator${SDKVERSION}.sdk" > "${LOG}" 2>&1
# add -isysroot to CC=
sed -ie "s!^CFLAG=!CFLAG=-isysroot /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator${SDKVERSION}.sdk !" "Makefile"

make >> "${LOG}" 2>&1
make install >> "${LOG}" 2>&1
make clean >> "${LOG}" 2>&1
#############

#############
# iPhoneOS armv6
echo "Building openssl for iPhoneOS ${SDKVERSION} armv6"
echo "Please stand by..."

export CC="/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc -arch armv6"
mkdir -p "${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-armv6.sdk"

LOG="${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-armv6.sdk/build-openssl-${VERSION}.log"

./configure BSD-generic32 --openssldir="${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-armv6.sdk" > "${LOG}" 2>&1

sed -ie "s!^CFLAG=!CFLAG=-isysroot /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS${SDKVERSION}.sdk !" "Makefile"
# remove sig_atomic for iPhoneOS
sed -ie "s!static volatile sig_atomic_t intr_signal;!static volatile intr_signal;!" "crypto/ui/ui_openssl.c"

make >> "${LOG}" 2>&1
make install >> "${LOG}" 2>&1
make clean >> "${LOG}" 2>&1
#############

#############
# iPhoneOS armv7
echo "Building openssl for iPhoneOS ${SDKVERSION} armv7"
echo "Please stand by..."

export CC="/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc -arch armv7"
mkdir -p "${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-armv7.sdk"

LOG="${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-armv7.sdk/build-openssl-${VERSION}.log"


./configure BSD-generic32 --openssldir="${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-armv7.sdk" >> "${LOG}" 2>&1

sed -ie "s!^CFLAG=!CFLAG=-isysroot /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS${SDKVERSION}.sdk !" "Makefile"
# remove sig_atomic for iPhoneOS
sed -ie "s!static volatile sig_atomic_t intr_signal;!static volatile intr_signal;!" "crypto/ui/ui_openssl.c"

make >> "${LOG}" 2>&1
make install >> "${LOG}" 2>&1
make clean >> "${LOG}" 2>&1
#############

echo "Build library..."
lipo -create ${CURRENTPATH}/bin/iPhoneSimulator${SDKVERSION}.sdk/lib/libssl.a ${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-armv6.sdk/lib/libssl.a ${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-armv7.sdk/lib/libssl.a -output ${CURRENTPATH}/libssl.a

lipo -create ${CURRENTPATH}/bin/iPhoneSimulator${SDKVERSION}.sdk/lib/libcrypto.a ${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-armv6.sdk/lib/libcrypto.a ${CURRENTPATH}/bin/iPhoneOS${SDKVERSION}-armv7.sdk/lib/libcrypto.a -output ${CURRENTPATH}/libcrypto.a

mkdir -p ${CURRENTPATH}/include
cp -R ${CURRENTPATH}/bin/iPhoneSimulator${SDKVERSION}.sdk/include/openssl ${CURRENTPATH}/include/
echo "Building done."
+5
2

openssl.

:

./Configure darwin64-x86_64-cc zlib no-asm no-krb5 shared
+1

, , , . , . Build- Script, "Configure" "make":

export COMMAND_MODE=unix2003

.

+1
source

More articles:


All Articles