I am trying to configure the pier as a service using JavaServiceWrapper 3.5.16, and I have tried all four integration methods listed on the JSW website, but still I have encountered this problem:
I am doing the same as in the JSW documentation and setting up the wrapper.conf file, I am running the jetty.bat file and it shows that the berth is up. But when I try to access it from the browser, I get
404 not found error
In addition, when the anchor is launched, it does not deploy any of the .war files in the webapps folder.
I configured wrapper.conf as follows for the 4th integration method (WrapperJarApp):
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperJarApp wrapper.java.classpath.1=%WRAPPER_HOME%/lib/*.jar wrapper.java.classpath.2=%JETTY_HOME%/lib/*.jar wrapper.java.classpath.3=%JETTY_HOME%/start.jar wrapper.java.library.path.1=%WRAPPER_HOME%/lib
What should I change in the configuration for the berth in order to start correctly and deploy the files in the webapp folder.
Please, help!
Editing:
wrapper log file content -
STATUS | wrapper | 2012/11/20 13:43:55 | → Wrapper Started as Console
STATUS | wrapper | 2012/11/20 13:43:55 | Java Service Wrapper Community Edition 32-bit 3.5.16 STATUS | wrapper | 2012/11/20 13:43:55 | Copyright (C) 1999-2012 Tanuki Software, Ltd. All rights reserved.
STATUS | wrapper | 2012/11/20 13:43:55 | http://wrapper.tanukisoftware.com
STATUS | wrapper | 2012/11/20 13:43:55 | STATUS | wrapper | 2012/11/20 13:43:55 | Running JVM ...
INFO | jvm 1 | 2012/11/20 13:43:56 | WrapperManager: Initialization ...
INFO | jvm 1 | 2012/11/20 13:43:56 | 2012-11-20 13: 43: 56.762: INFO: oejs.Server: jetty-8.1.3.v20120416
INFO | jvm 1 | 2012/11/20 13:43:57 | 2012-11-20 13: 43: 56.965: INFO: oejus.SslContextFactory: Enabled protocols [SSLv2Hello, SSLv3, TLSv1] from [SSLv2Hello, SSLv3, TLSv1] INFO | jvm 1 | 2012/11/20 13:43:57 | 2012-11-20 13:43: 56.965: INFO: oejs.AbstractConnector: started SslSocketConnector@0.0.0.0 : 7443
INFO | jvm 1 | 2012/11/20 13:43:57 | 2012-11-20 13:43: 56.996: INFO: oejs.AbstractConnector: started SelectChannelConnector@0.0.0.0 : 8085
wrapper.conf -
#encoding=UTF-8 # Configuration files must begin with a line specifying the encoding # of the the file. #******************************************************************** # Wrapper License Properties (Ignored by Community Edition) #******************************************************************** # Professional and Standard Editions of the Wrapper require a valid # License Key to start. Licenses can be purchased or a trial license # requested on the following pages: # http://wrapper.tanukisoftware.com/purchase # http://wrapper.tanukisoftware.com/trial # Include file problems can be debugged by removing the first '#' # from the following line: ##include.debug # The Wrapper will look for either of the following optional files for a # valid License Key. License Key properties can optionally be included # directly in this configuration file. #include ../conf/wrapper-license.conf #include ../conf/wrapper-license-%WRAPPER_HOST_NAME%.conf # The following property will output information about which License Key(s) # are being found, and can aid in resolving any licensing problems. #wrapper.license.debug=TRUE #******************************************************************** # Wrapper Localization #******************************************************************** # Specify the locale which the Wrapper should use. By default the system # locale is used. #wrapper.lang=en_US # en_US or ja_JP # Specify the location of the Wrapper language resources. If these are # missing, the Wrapper will default to the en_US locale. wrapper.lang.folder=../lang #******************************************************************** # Wrapper Java Properties #******************************************************************** # Java Application # Locate the java binary on the system PATH: wrapper.java.command=java # Specify a specific java binary: #set.JAVA_HOME=/java/path #wrapper.java.command=%JAVA_HOME%/bin/java # Tell the Wrapper to log the full generated Java command line. #wrapper.java.command.loglevel=INFO # Java Main class. This class must implement the WrapperListener interface # or guarantee that the WrapperManager class is initialized. Helper # classes are provided to do this for you. See the Integration section # of the documentation for details. wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp # Java Classpath (include wrapper.jar) Add class path elements as # needed starting from 1 wrapper.java.classpath.1=%JETTY_HOME%/lib/wrapper.jar wrapper.java.classpath.2=%JETTY_HOME%/start.jar # Java Library Path (location of Wrapper.DLL or libwrapper.so) wrapper.java.library.path.1=%JETTY_HOME%/lib # Java Bits. On applicable platforms, tells the JVM to run in 32 or 64-bit mode. wrapper.java.additional.auto_bits=TRUE # Java Additional Parameters wrapper.java.additional.1=wrapper.java.additional.1=-Djetty.home=%JETTY_HOME% #wrapper.java.additional.2=-Djava.io.tmpdir=/tmp # Java Additional Parameters from File wrapper.java.additional_file= # Initial Java Heap Size (in MB) #wrapper.java.initmemory=3 # Maximum Java Heap Size (in MB) #wrapper.java.maxmemory=64 # Application parameters. Add parameters as needed starting from 1 wrapper.app.parameter.1=org.eclipse.jetty.start.Main #******************************************************************** # Wrapper Logging Properties #******************************************************************** # Enables Debug output from the Wrapper. # wrapper.debug=TRUE # Format of output for the console. (See docs for formats) wrapper.console.format=PM # Log Level for console output. (See docs for log levels) wrapper.console.loglevel=INFO # Log file to use for wrapper output logging. wrapper.logfile=../logs/wrapper.log # Format of output for the log file. (See docs for formats) wrapper.logfile.format=LPTM # Log Level for log file output. (See docs for log levels) wrapper.logfile.loglevel=INFO # Maximum size that the log file will be allowed to grow to before # the log is rolled. Size is specified in bytes. The default value # of 0, disables log rolling. May abbreviate with the 'k' (kb) or # 'm' (mb) suffix. For example: 10m = 10 megabytes. wrapper.logfile.maxsize=0 # Maximum number of rolled log files which will be allowed before old # files are deleted. The default value of 0 implies no limit. wrapper.logfile.maxfiles=0 # Log Level for sys/event log output. (See docs for log levels) wrapper.syslog.loglevel=NONE #******************************************************************** # Wrapper General Properties #******************************************************************** # Allow for the use of non-contiguous numbered properties wrapper.ignore_sequence_gaps=TRUE # Do not start if the pid file already exists. wrapper.pidfile.strict=TRUE # Title to use when running as a console wrapper.console.title=Test Wrapper Sample Application #******************************************************************** # Wrapper JVM Checks #******************************************************************** # Detect DeadLocked Threads in the JVM. (Requires Standard Edition) wrapper.check.deadlock=TRUE wrapper.check.deadlock.interval=10 wrapper.check.deadlock.action=RESTART wrapper.check.deadlock.output=FULL # Out Of Memory detection. # (Ignore output from dumping the configuration to the console. This is only needed by the TestWrapper sample application.) wrapper.filter.trigger.999=wrapper.filter.trigger.*java.lang.OutOfMemoryError wrapper.filter.allow_wildcards.999=TRUE wrapper.filter.action.999=NONE # Ignore -verbose:class output to avoid false positives. wrapper.filter.trigger.1000=[Loaded java.lang.OutOfMemoryError wrapper.filter.action.1000=NONE # (Simple match) wrapper.filter.trigger.1001=java.lang.OutOfMemoryError # (Only match text in stack traces if -XX:+PrintClassHistogram is being used.) #wrapper.filter.trigger.1001=Exception in thread "*" java.lang.OutOfMemoryError #wrapper.filter.allow_wildcards.1001=TRUE wrapper.filter.action.1001=RESTART wrapper.filter.message.1001=The JVM has run out of memory. #******************************************************************** # Wrapper Email Notifications. (Requires Professional Edition) #******************************************************************** # Common Event Email settings. #wrapper.event.default.email.debug=TRUE #wrapper.event.default.email.smtp.host=<SMTP_Host> #wrapper.event.default.email.smtp.port=25 #wrapper.event.default.email.subject=[%WRAPPER_HOSTNAME%:%WRAPPER_NAME%:%WRAPPER_EVENT_NAME%] Event Notification #wrapper.event.default.email.sender=<Sender email> #wrapper.event.default.email.recipient=<Recipient email> # Configure the log attached to event emails. #wrapper.event.default.email.attach_log=TRUE #wrapper.event.default.email.maillog.lines=50 #wrapper.event.default.email.maillog.format=LPTM #wrapper.event.default.email.maillog.loglevel=INFO # Enable specific event emails. #wrapper.event.wrapper_start.email=TRUE #wrapper.event.jvm_prelaunch.email=TRUE #wrapper.event.jvm_start.email=TRUE #wrapper.event.jvm_started.email=TRUE #wrapper.event.jvm_deadlock.email=TRUE #wrapper.event.jvm_stop.email=TRUE #wrapper.event.jvm_stopped.email=TRUE #wrapper.event.jvm_restart.email=TRUE #wrapper.event.jvm_failed_invocation.email=TRUE #wrapper.event.jvm_max_failed_invocations.email=TRUE #wrapper.event.jvm_kill.email=TRUE #wrapper.event.jvm_killed.email=TRUE #wrapper.event.jvm_unexpected_exit.email=TRUE #wrapper.event.wrapper_stop.email=TRUE # Specify custom mail content wrapper.event.jvm_restart.email.body=The JVM was restarted.\n\nPlease check on its status.\n #******************************************************************** # Wrapper Windows NT/2000/XP Service Properties #******************************************************************** # WARNING - Do not modify any of these properties when an application # using this configuration file has been installed as a service. # Please uninstall the service before modifying this section. The # service can then be reinstalled. # Name of the service wrapper.name=testwrapper # Display name of the service wrapper.displayname=Test Wrapper Sample Application # Description of the service wrapper.description=Test Wrapper Sample Application Description # Service dependencies. Add dependencies as needed starting from 1 wrapper.ntservice.dependency.1= # Mode in which the service is installed. AUTO_START, DELAY_START or DEMAND_START wrapper.ntservice.starttype=AUTO_START # Allow the service to interact with the desktop. wrapper.ntservice.interactive=false wrapper.ntservice.name=jetty wrapper.ntservice.displayname=jetty deployment Server wrapper.ntservice.description=jetty deployment Server