Geek Answers Handbook

Soft-float version of Raspbian not loading

I uploaded the Raspbian hard floating image here:

http://www.raspberrypi.org/downloads

I copied the recommended hard-swimming image on the SD card, and the raspberry Pi boot with it.

Then I downloaded the soft-float version of Raspbian because I need some software to run, which does not work with the hard version. I formatted the SD card again, copied the soft float image onto it and tried to load the raspberry Pi with it.

Problem: Raspbery Pi does not boot with a floating version of Raspbian! I can see that the green ACT LED lights up in less than a second. After that, only the red power indicator turns on, after which nothing happens.

I repeated this process a couple of times and reloaded the images, checked the SHA of the downloaded file, etc. It just doesn't work. An image with a solid float is always loading (the green "ACT" indicator flashes quickly, as usual).

Any ideas?

+3
source share
3 answers

Update: if you have a new Raspberry Pi with Hynix memory, older versions of Raspbian will not load. In particular, you will need at least 2013-02-09 Debian 7 (Wheezy). See this post .

2013-02-09 Wheezy , , , Linux ( , GPU Raspberry Pi, ARM ). , rpi-update , .

-22, Pis, - , Pi, , ? , , . , , , - soft-float, , , . ; , : -)

  • "" (2012-02-09) SD-.
  • SD- Windows
  • , * gz, Linux. ,
  • SD, , .
  • , ?

: , . , , start_elf , , Pis. , Raspbian -, , , , . :

  • Wheezy SD-. ( ) .
  • SD- Windows. FAT, . start.elf. Windows.
  • Wheezy SD- Windows.
  • start.elf .
  • .

. .

+4

(Raspbian "wheezy" ), soft-float (Soft-float Debian "wheezy" ). Windows ( ) , .

: http://www.raspberrypi.org/archives/3534

P.S. , , , , .

bootcode.bin
start.elf
fixup.dat

Raspberry Pi SD- Soft-float Debian "wheezy"

+1

dd , , bs=1M...

, , , , Pi . / Pi.

0

More articles:


All Articles