OpenCV: building a color scheme from a matrix

Question

I have a 50 x 50 matrix that has specific values ​​from 1 to 50. I need to build a color map for the same using OpenCV.

I already did this in MATLAB (using this answer ):

>> A = randi([10,60],100,100);
>> colormap('hot')
>> imagesc(A)
>> colorbar    

And the result comes as .

I would like to do the same with openCV.

How should I do it?

I can't figure out how to implement a hot function that looks like this (see only hot)

:

In addition, it will also be interesting for me to place a color bar, as shown in the first image.

---

Update (the final code that I run)

Unfortunately, while I can not build the correct color map: Here is the MATLAB code:

Note: A is a 10 by 100 matrix.

A = [0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9;   0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9;   0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9;   0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9;   0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9;   0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9;   0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9;   0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9;   0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9;   0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9;   ]

Colormap ( '');  imagesc () Colorbar

:

, :

, MATLAB:

   int main() 


{




ifstream Read("myfile.txt");

vector<int> nums;
while ( !Read.eof() ) {
    int n;
    Read >> n;
    nums.push_back(n);
}
// now make a Mat from the vector:
Mat mat(nums);

cout<<mat<<endl; //for testing 


Mat mat1d(nums);
Mat mat2d = mat1d.reshape(1, 10);
//
Mat image; //create an empty image. (you can leave it empty ;)
//// Apply the colormap, but on the 2d mat, not on the 2d vector, please:
applyColorMap( mat2d, image, COLORMAP_JET );
            // Show the result:
imshow("colormap", image);
waitKey(0);
return 0;
}

.

MATLAB Opencv.

Answer 1

1d- 2- :

    //
    // before doing anything else, CLEAN UP YOUR DAMN TXTFILE. 
    // it should contain nothing than numbers and spaces.
    ifstream Read("m.txt");

    // be extra picky about the type here.
    // we are reading in a 8bit grayscale map.
    vector<uchar> nums;
    for (int i=0; (i<100*10)&&(!Read.eof()); i++ ) {
        int n;
        Read >> n;
        nums.push_back(n);
    }

    // now make a Mat from the vector:
    Mat mat1d(nums);
    Mat mat2d = mat1d.reshape(1, 10);

    // your data is in the [0..9] range, so scale up to [0..255] uchar range
    mat2d *= (255/10); 

    cout<<mat2d<<endl; //for testing 
    //
    Mat image; //create an empty image. (you can leave it empty ;)
    //// Apply the colormap, but on the 2d mat, not on the 2d vector, please:
    applyColorMap( mat2d, image, COLORMAP_HOT );
                // Show the result:
    imshow("colormap", image);
    waitKey(0);